White Glaze

Preparation:

1.  Make sure piece is dry and lint free.
2. A coat of Liquid Wax should be used before applying your glaze.  This will  lock in the base coat, keeping the glaze from blending with the paint and allowing you to move the glaze around without pulling the paint off.

Application:

1. Open glaze and stir well.
2. Have a good amount of damp paper towels or neutral cloth ready to use.  Be sure they are just damp, not wet and separated into single sheets to use.
3. Apply the glaze in no more than a 12 to 18 inch area at a time, using a damp paper towel or neutral cloth gently wipe the glaze off.  Turn your paper towel or cloth as needed to ensure you are working with a clean area.  This step should be done quickly as the glaze will start to dry within minutes.

Finishing:

• Once you have achieved the desired look, allow the glaze to fully dry and seal with your favourite Plaster Paint Sealant.

Clean up:

• Water based soap and water clean up.

Best brushes to use

• Restore synthetic brush.