Silver

Preparation:

Requires minimal to no prep work or sanding.  Can be applied to just about any surface including wood, metal and glass.  If the original finish is high gloss or oiled, first use New Surface for best results. Clean piece with soap and water and let dry before beginning.

Application:

1.  Paint two even coats, allow for 30-35 minutes dry time between coats.
2.  Following the grain of the wood, use consistent brush strokes from one end to the other.
3.  Clean any drips from edges.
4.  Avoid going back over an area after two minutes as the paint will become tacky.

Finishing:

• If choosing to distress you can either wet or dry sand.
• Glazes can be applied before or after distressing.
• Metallic Plaster Paint must be sealed.
• Choose from one our sealants to complete your project.

Clean up:

• Use a water based soap to help your brushes last longer.

Best brushes to use

• If your looking for a vintage look with brush strokes use a synthetic brush or chip style brush.  If you want a clean looking finish use a natural bristle brush or roller.

Additional Info:

• Low VOC’s
• No odor
• Will not mold
• Can distress, layer and mix paint colours (Plaster Paint Original and Metallic Plaster Paint only) together.
• Thick self-levelling coats