Add a little bling and a lot of glam to your project using the Metallic Plaster Paints by the Plaster Paint Company!
You can use the Metallic paints as a top coat, add to any color paint for a beautiful custom color, dry brush over a base coat for a subtle touch, or create a shimmering wash or glaze.
Preparation:
Requires minimal to no prep work or sanding. Â Can be applied to just about any surface including wood, metal, glass, tile & fabric. Â If the original finish is high gloss or oiled, first use new surface for best results.Clean piece with soap and water and let dry.
Application:
1. Â Paint two even coats with 30-35 minutes dry time between coats.
2. Â Following the grain of the wood, use consistent brush strokes from one end to the other.
3. Â Clean any drips from edges.
4. Â Avoid going back over an area after two plus minutes as the paint will become tacky.
Finishing:
- If choosing to distress you can either wet or dry sand.
- Glazes can be applied before or after distressing if desired.
- Plaster Paint Original must be sealed.
- Choose one of our 5 sealants.
Clean up:
- Water based soap and water clean up.
Best brushes to use
- If your looking for a vintage look with brush strokes use a synthetic brush or chip style brush. Â If you want a clean looking finish use a natural bristle brush, roller or chalk sprayer.
Additional Info:
- Low VOC’s
- No odor
- Won’t mold
- CAN distress, layer & mix paint colors (Plaster Paint Original & Metallics) together.
- Thick self-levelling coats
- Available in 10 colors